Steel coils are wound sheets of steel produced in a hot-strip mill. Slabs, initially 2-10 inches thick, are rolled between horizontal and vertical rolls to achieve a flat-rolled steel coil about a quarter-inch thick and a quarter mile long. These coils are efficiently stored and transported and come in various types.
Hot Rolled Coils (HR Coils)

• Cold Rolled Coils (CR Coils)

• Galvanized Coils (GP/GC Coils)

• Stainless Steel Coils

H.R. steel thicker than 4mm is called H.R. plates, available in various grades based on usage. Mild steel is used for general fabrication, carbon/alloy steel for high wear and tear, and stainless steel for water or chemical exposure. Common grades include IS1079, IS2062 A/B/C, SAILMA250/300/350, C-45, C-55, EN8/9/19/24, boiler qualities, and stainless steel (200, 300, 400 series), with custom options available.

This construction material has a cross-section that resembles a 90-degree angle. The dimensions are characterized by the length and width of each edge. If the lengths of both sides are identical, the angles will be equal; if they differ, the angles will be unequal. It is used in every building project. The most commonly provided lengths vary from 10m to 12m                                                   

Joists feature an H-shaped cross section and are measured by the length of the horizontal section relative to the vertical part of the H. They are primarily utilized in building to add support to the roof. They are also utilized as a supporting framework for bridges

Round, slender semi-finished steel length that is produced from a billet and coiled for additional processing. Rod is often shaped into wire items or utilized to produce bolts and nails.

Product of a solid shape that is essentially circular in cross-section and provided in coils or straight lengths. Wire rods are additionally utilized for producing welding rods

Tor Steel is a crucial material in the construction of any superstructure. It is primarily utilized in foundations and also for strengthening cement concrete. The cross-section has a circular shape and varies in thickness from 6mm to 50mm